Cisco IP-Phone 7960 an Fritzbox
Das Cisco 7960 ist ein älteres SIP-Phones, das sechs SIP-Accounts parallel unterstützt. Dazu muss allerdings eine SIP- und keine SCCP-Firmware aufgespielt sein.
Die Konfiguration bezieht es dann von einem TFTP-Server im selben Subnetz.
Zunächst sucht es nach der Datei SIPDefault.cnf. Auch wenn alle anderen telefonspezifische Dateien in einem Unterordner auf dem TFTP-Server liegen können, so muss diese Datei im Hauptverzeichnis liegen.
DIPDefault.cnf könnte so aussehen:
# SIP Default Generic Configuration File
# Registrar FRITZ!Box 7270
# Image Version
# image_version: P0S3-8-12-00 Auskommentiert da SIP Firmware schon geladen ist
# Proxy Server Nichtbenötigte auskommentiert
proxy1_address: "<IP der Fritzbox>" ; Can be dotted IP or FQDN
# proxy2_address: "" ; Can be dotted IP or FQDN
# proxy3_address: "" ; Can be dotted IP or FQDN
# proxy4_address: "" ; Can be dotted IP or FQDN
# proxy5_address: "" ; Can be dotted IP or FQDN
# proxy6_address: "" ; Can be dotted IP or FQDN
# Proxy Server Port (default - 5060) Nichtbenötigte auskommentiert
proxy1_port: 5060
# proxy2_port: 5060
# proxy3_port: 5060
# proxy4_port: 5060
# proxy5_port: 5060
# proxy6_port: 5060
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: 1
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: 3600
# Codec for media stream (g711ulaw (default), g711alaw, g729a)
preferred_codec: "g711alaw"
# TOS bits in media stream [0-5] (Default - 5)
tos_media: 5
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: 1
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: "0"
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: 3
# SIP Timers
timer_t1: 500 ; Default 500 msec
timer_t2: 4000 ; Default 4 sec
sip_retx: 10 ; Default 10
sip_invite_retx: 6 ; Default 6
timer_invite_expires: 180 ; Default 180 sec
####### New Parameters added in Release 2.0 #######
# template (.xml format file relative to the TFTP root directory)
# dial_template: dialplan Auskommentiert, da keine dialplan.xml da ist
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./cisco7960/" ; Example: ./sip_phone/
# Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
sntp_server: "ntp.sipgate.net" ; SNTP Server IP Address
sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default)
time_zone: CET ; Time Zone Phone is in
dst_offset: 1 ; Offset from Phone's time when DST is in effect
dst_start_month: April ; Month in which DST starts
dst_start_day: "" ; Day of month in which DST starts
dst_start_day_of_week: Sun ; Day of week in which DST starts
dst_start_week_of_month: 1 ; Week of month in which DST starts
dst_start_time: 02 ; Time of day in which DST starts
dst_stop_month: Oct ; Month in which DST stops
dst_stop_day: "" ; Day of month in which DST stops
dst_stop_day_of_week: Sunday ; Day of week in which DST stops
dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month
dst_stop_time: 2 ; Time of day in which DST stops
dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment
time_format_24hr: 1 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: 0 ; Default 0 (Do Not Disturb feature is off)
# Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: 0 ; Default 0 (Disable sending all calls as anonymous)
# Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls)
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: 101 ; Default 101
# Sync value of the phone used for remote reset
sync: 1 ; Default 1
####### New Parameters added in Release 2.1 #######
# Backup Proxy Support
proxy_backup: "" ; Dotted IP of Backup Proxy
proxy_backup_port: 5060 ; Backup Proxy port (default is 5060)
# Emergency Proxy Support
proxy_emergency: "<IP der Fritzbox>" ; Dotted IP of Emergency Proxy
proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060)
# Configurable VAD option
enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable
####### New Parameters added in Release 2.2 ######
# NAT/Firewall Traversal
nat_enable: 0 ; 0-Disabled (default), 1-Enabled
# nat_address: "" ; WAN IP address of NAT box (dotted IP or DNS A record only)
# voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060)
# start_media_port: 16384 ; Start RTP range for media (default - 16384)
# end_media_port: 32766 ; End RTP range for media (default - 32766)
# nat_received_processing: 1 ; 0-Disabled (default), 1-Enabled
# Outbound Proxy Support
outbound_proxy: "<IP der Fritzbox>" ; restricted to dotted IP or DNS A record only
outbound_proxy_port: 5060 ; default is 5060
####### New Parameter added in Release 3.0 #######
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable : 0 ; 0-Disabled, 1-Enabled (default)
####### New Parameters added in Release 3.1 #######
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: 0 ; 0-Disabled, 1-Enabled (default)
# Telnet Level (enable or disable the ability to telnet into the phone)
telnet_level: 2 ; 0-Disabled (default), 1-Enabled, 2-Privileged
####### New Parameters added in Release 4.0 #######
# XML URLs
services_url: "http://webserver/cisco7960/cisco7960services.xml" ; URL for external Phone Services
directory_url: "" ; URL for external Directory location
logo_url: "http://webserver/cisco7960/logo.bmp" ; URL for image
# HTTP Proxy Support
http_proxy_addr: "" ; Address of HTTP Proxy server
http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default)
# Dynamic DNS/TFTP Support
dyn_dns_addr_1: "<IP der Fritzbox>" ; restricted to dotted IP
dyn_dns_addr_2: "" ; restricted to dotted IP
dyn_tftp_addr: "<IP des TFTP-Servers>" ; restricted to dotted IP
# Remote Party ID
remote_party_id: 0 ; 0-Disabled (default), 1-Enabled
####### New Parameters added in Release 4.4 #######
# Call Hold Ringback (0-off, 1-on, 2-off with no user control, 3-on with no user control)
call_hold_ringback: 0 ; Default 0 (Call Hold Ringback feature is off)
####### New Parameters added in Release 6.0 #######
# Dialtone Stutter for MWI
stutter_msg_waiting: 1 ; 0-Disabled (default), 1-Enabled
# RTP Call Statistics (SIP BYE/200 OK message exchange)
call_stats: 1 ; 0-Disabled (default), 1-Enabled
# Setting for Message speeddial to UOne box
# Belegung mit der FritzBox Voice Mail Nummer
messages_uri: "**600"
logo_url sollte dabei auf ein BMP der Maße 90x56 mit 256 Graustufen zeigen. Als Farben sollten genutzt werden: #000000 (schwarz), #FFFFFF (weiss), #404040 (grau) und #808080 (hellgrau).
services_url zeigt auf ein TXT oder XML. Der Aufbau des XML ist bei IBM ganz gut beschrieben.
Im Unterverzeichnis "./cisco7960" auf dem TFTP-Server kann jetzt pro Telefon eine Datei SIP<Mac>.cnf abgelegt werden.
Weiterhin sucht das Telefon nach einer optionale RingList.xml. Diese ist auf den Cisco-Seiten sehr gut beschrieben.
Die Konfiguration bezieht es dann von einem TFTP-Server im selben Subnetz.
Zunächst sucht es nach der Datei SIPDefault.cnf. Auch wenn alle anderen telefonspezifische Dateien in einem Unterordner auf dem TFTP-Server liegen können, so muss diese Datei im Hauptverzeichnis liegen.
DIPDefault.cnf könnte so aussehen:
# SIP Default Generic Configuration File
# Registrar FRITZ!Box 7270
# Image Version
# image_version: P0S3-8-12-00 Auskommentiert da SIP Firmware schon geladen ist
# Proxy Server Nichtbenötigte auskommentiert
proxy1_address: "<IP der Fritzbox>" ; Can be dotted IP or FQDN
# proxy2_address: "" ; Can be dotted IP or FQDN
# proxy3_address: "" ; Can be dotted IP or FQDN
# proxy4_address: "" ; Can be dotted IP or FQDN
# proxy5_address: "" ; Can be dotted IP or FQDN
# proxy6_address: "" ; Can be dotted IP or FQDN
# Proxy Server Port (default - 5060) Nichtbenötigte auskommentiert
proxy1_port: 5060
# proxy2_port: 5060
# proxy3_port: 5060
# proxy4_port: 5060
# proxy5_port: 5060
# proxy6_port: 5060
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: 1
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: 3600
# Codec for media stream (g711ulaw (default), g711alaw, g729a)
preferred_codec: "g711alaw"
# TOS bits in media stream [0-5] (Default - 5)
tos_media: 5
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: 1
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: "0"
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: 3
# SIP Timers
timer_t1: 500 ; Default 500 msec
timer_t2: 4000 ; Default 4 sec
sip_retx: 10 ; Default 10
sip_invite_retx: 6 ; Default 6
timer_invite_expires: 180 ; Default 180 sec
####### New Parameters added in Release 2.0 #######
# template (.xml format file relative to the TFTP root directory)
# dial_template: dialplan Auskommentiert, da keine dialplan.xml da ist
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./cisco7960/" ; Example: ./sip_phone/
# Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
sntp_server: "ntp.sipgate.net" ; SNTP Server IP Address
sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default)
time_zone: CET ; Time Zone Phone is in
dst_offset: 1 ; Offset from Phone's time when DST is in effect
dst_start_month: April ; Month in which DST starts
dst_start_day: "" ; Day of month in which DST starts
dst_start_day_of_week: Sun ; Day of week in which DST starts
dst_start_week_of_month: 1 ; Week of month in which DST starts
dst_start_time: 02 ; Time of day in which DST starts
dst_stop_month: Oct ; Month in which DST stops
dst_stop_day: "" ; Day of month in which DST stops
dst_stop_day_of_week: Sunday ; Day of week in which DST stops
dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month
dst_stop_time: 2 ; Time of day in which DST stops
dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment
time_format_24hr: 1 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: 0 ; Default 0 (Do Not Disturb feature is off)
# Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: 0 ; Default 0 (Disable sending all calls as anonymous)
# Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls)
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: 101 ; Default 101
# Sync value of the phone used for remote reset
sync: 1 ; Default 1
####### New Parameters added in Release 2.1 #######
# Backup Proxy Support
proxy_backup: "" ; Dotted IP of Backup Proxy
proxy_backup_port: 5060 ; Backup Proxy port (default is 5060)
# Emergency Proxy Support
proxy_emergency: "<IP der Fritzbox>" ; Dotted IP of Emergency Proxy
proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060)
# Configurable VAD option
enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable
####### New Parameters added in Release 2.2 ######
# NAT/Firewall Traversal
nat_enable: 0 ; 0-Disabled (default), 1-Enabled
# nat_address: "" ; WAN IP address of NAT box (dotted IP or DNS A record only)
# voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060)
# start_media_port: 16384 ; Start RTP range for media (default - 16384)
# end_media_port: 32766 ; End RTP range for media (default - 32766)
# nat_received_processing: 1 ; 0-Disabled (default), 1-Enabled
# Outbound Proxy Support
outbound_proxy: "<IP der Fritzbox>" ; restricted to dotted IP or DNS A record only
outbound_proxy_port: 5060 ; default is 5060
####### New Parameter added in Release 3.0 #######
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable : 0 ; 0-Disabled, 1-Enabled (default)
####### New Parameters added in Release 3.1 #######
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: 0 ; 0-Disabled, 1-Enabled (default)
# Telnet Level (enable or disable the ability to telnet into the phone)
telnet_level: 2 ; 0-Disabled (default), 1-Enabled, 2-Privileged
####### New Parameters added in Release 4.0 #######
# XML URLs
services_url: "http://webserver/cisco7960/cisco7960services.xml" ; URL for external Phone Services
directory_url: "" ; URL for external Directory location
logo_url: "http://webserver/cisco7960/logo.bmp" ; URL for image
# HTTP Proxy Support
http_proxy_addr: "" ; Address of HTTP Proxy server
http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default)
# Dynamic DNS/TFTP Support
dyn_dns_addr_1: "<IP der Fritzbox>" ; restricted to dotted IP
dyn_dns_addr_2: "" ; restricted to dotted IP
dyn_tftp_addr: "<IP des TFTP-Servers>" ; restricted to dotted IP
# Remote Party ID
remote_party_id: 0 ; 0-Disabled (default), 1-Enabled
####### New Parameters added in Release 4.4 #######
# Call Hold Ringback (0-off, 1-on, 2-off with no user control, 3-on with no user control)
call_hold_ringback: 0 ; Default 0 (Call Hold Ringback feature is off)
####### New Parameters added in Release 6.0 #######
# Dialtone Stutter for MWI
stutter_msg_waiting: 1 ; 0-Disabled (default), 1-Enabled
# RTP Call Statistics (SIP BYE/200 OK message exchange)
call_stats: 1 ; 0-Disabled (default), 1-Enabled
# Setting for Message speeddial to UOne box
# Belegung mit der FritzBox Voice Mail Nummer
messages_uri: "**600"
logo_url sollte dabei auf ein BMP der Maße 90x56 mit 256 Graustufen zeigen. Als Farben sollten genutzt werden: #000000 (schwarz), #FFFFFF (weiss), #404040 (grau) und #808080 (hellgrau).
services_url zeigt auf ein TXT oder XML. Der Aufbau des XML ist bei IBM ganz gut beschrieben.
Im Unterverzeichnis "./cisco7960" auf dem TFTP-Server kann jetzt pro Telefon eine Datei SIP<Mac>.cnf abgelegt werden.
Weiterhin sucht das Telefon nach einer optionale RingList.xml. Diese ist auf den Cisco-Seiten sehr gut beschrieben.
superwallah - 3. Feb, 21:22
0 Kommentare - Kommentar verfassen - 0 Trackbacks